A meat thermometer is the most reliable way to tell when food is done. This guide explains where to place it, which internal temperatures to use for poultry, beef, pork, lamb, fish, and leftovers, and how to check a reading without overcooking dinner.
Overview
Cooking time is only an estimate. The thickness of a cut, its starting temperature, the pan or appliance, and the shape of the food can all change how quickly the center cooks. A thermometer measures the one detail that matters most for safety: the internal temperature at the coolest part of the food.
For the most useful reading, insert the probe into the thickest section and aim for the center. Keep the tip away from bone, gristle, fat pockets, the pan, and the cooking surface. These areas can produce a reading that is warmer or cooler than the edible center.
Use the table below as a reusable meat thermometer temperature chart. Temperatures are listed in Fahrenheit, with Celsius in parentheses.
| Food | Minimum internal temperature | Where to measure |
|---|---|---|
| Whole poultry, poultry pieces, and ground poultry | 165°F (74°C) | Thickest part; avoid bone |
| Ground beef, pork, lamb, and veal | 160°F (71°C) | Center of the thickest portion |
| Beef, pork, lamb, and veal steaks, chops, and roasts | 145°F (63°C), then rest for at least 3 minutes | Thickest part; insert from the side when practical |
| Fish and shellfish | 145°F (63°C) | Thickest part of the fillet or portion |
| Reheated leftovers and casseroles | 165°F (74°C) | Center and several cool spots |
These are minimum internal temperatures, not targets that require food to remain at that temperature for a set cooking time. For quality, you may choose to remove some large cuts shortly before they reach their final temperature because they continue cooking as they rest. Do not rely on carryover cooking for thin pieces or uncertain readings; verify the food has reached its applicable safe temperature.
Checklist by scenario
Chicken, turkey, and other poultry
- Insert the probe into the thickest part of the breast, thigh, or drumstick, depending on the piece.
- For a whole bird, check the innermost thigh and the thickest part of the breast. Take care not to touch bone.
- Check more than one location, especially when the bird is large or unevenly shaped.
- Confirm 165°F (74°C) before serving. A browned exterior or clear-looking juices is not a substitute for a temperature reading.
Steaks, chops, and roasts
- Push the probe into the side of a steak or chop so the tip reaches the center. This is more accurate than inserting from the top into a thin cut.
- For a roast, measure in the thickest central area and check more than one spot if its shape is irregular.
- For beef, pork, lamb, and veal cuts, use 145°F (63°C) followed by at least a three-minute rest.
- Expect a thick roast to rise somewhat during resting. Thin cuts may show little carryover, so cook them to the required temperature before removing them from heat.
Ground meat, meatloaf, and burgers
- Measure the center of the thickest patty or loaf, inserting the probe from the side when possible.
- Check several burgers if they differ in thickness or are arranged at different distances from the heat.
- Cook ground beef, pork, lamb, or veal to 160°F (71°C). Ground poultry requires 165°F (74°C).
Fish and thin fillets
- Insert the probe horizontally into the thickest part of the fillet. If the fillet is very thin, slide the probe in from the side rather than straight down.
- Check the thickest portion and another area if the fillet tapers sharply.
- Use 145°F (63°C) as the safe cooking temperature. Texture can help you judge doneness, but it should not replace the thermometer.
Leftovers, casseroles, and reheated meals
- Place the probe in the center, where food often warms last.
- Stir soups, sauces, or other foods that can be mixed, then measure again in more than one location.
- Reheat leftovers and casseroles to 165°F (74°C), checking cold spots rather than only the edges.
What to double-check
Calibrate the thermometer
To check an instant-read thermometer, fill a glass with ice and add enough cold water to surround the ice. Stir, place the probe in the water without touching the glass, and wait for the display to stabilize. It should read about 32°F (0°C). If it does not, follow the manufacturer’s instructions for adjustment or note the difference when interpreting readings. Some thermometers can also be checked in boiling water, but the boiling point varies with elevation.
Confirm the probe is positioned correctly
Hold the probe steady until the number stops changing. On a thick roast, test the center and a second area. If the readings differ, use the lowest reliable reading and continue cooking. On a pan of burgers or chicken pieces, test the pieces that appear thickest rather than assuming they all cook at the same rate.
Check the tool itself
Replace or recharge batteries when the display is faint or slow. Make sure the probe is fully inserted to the manufacturer’s marked sensing area, and confirm that the thermometer is rated for the cooking environment. An instant-read thermometer is for checking food, not for remaining in an oven unless it is specifically designed for that use.
Clean between uses
Wash the probe with hot, soapy water before and after each use, then rinse and dry it. Do not submerge the display or cable unless the instructions specifically allow it. When checking cooked food after raw meat, clean the probe before reinserting it.
Common mistakes
- Measuring near the bone: Bone can interfere with the reading. Reposition the probe in the surrounding meat.
- Touching the pan or grill: A hot surface can make food appear done before its center is cooked.
- Checking only one spot: Uneven thickness and uneven heat mean one reading may not represent the whole dish.
- Using color as proof: Pink meat, clear juices, or a browned crust cannot reliably establish internal temperature.
- Leaving the probe in a thin cut: A thick probe can pass through the center and touch the pan. Insert from the side and keep the tip in the middle.
- Confusing resting with finishing: Resting improves texture and allows carryover cooking, but it is not a reason to serve food that has not reached its applicable minimum temperature.
- Forgetting leftovers: A casserole can be hot around the edges while remaining cool in the center. Stir when possible and check multiple locations.
When to revisit
Keep this guide with your kitchen references and check it whenever you cook a new cut, switch from an oven to a grill or air fryer, use a different thermometer, or prepare a large holiday meal. Recalibrate or verify a thermometer after it has been dropped, exposed to unusual heat, or begun showing inconsistent readings. It is also sensible to review official food-safety guidance periodically, since recommended temperatures and equipment instructions can change.
Before cooking, use this final workflow:
- Choose the correct minimum temperature for the food.
- Clean and, if needed, calibrate the thermometer.
- Cook until the thickest part can be measured without touching bone or the pan.
- Check multiple spots or pieces when the food is uneven.
- Rest food when the recipe calls for it, then recheck if the temperature was close.
- Wash and dry the probe before storing it.
For related kitchen guidance, see How to Cook Chicken Breast Without Drying It Out and Cooking Conversions Made Simple.